The Modal Shop, Inc. A PCB Group Co.    Global Sales   Video   Newsletters   Library   About Us     
 
Home > Rental > Triaxial ICP Accelerometers

Triaxial ICP Accelerometers

Triaxial accelerometers are designed with three orthogonal sensing elements to enable simultaneous multi-axis measurements (x-, y-, and z-axis). Smaller units minimize mass loading effects and permit installation into confined areas. A unit with a tapped hole in its base may be secured with a screw passing through the object under test to aid in axis alignment, or may be stud-mounted to a separate adhesive mounting base.

These units typically feature a 4-pin electrical connector (for a single cable hook-up) or an integral 4-conductor cable. Types include High Temperature, Miniature, General Purpose, Modal Array, Shock, Seat Pad, or Filtered accelerometers. See accessories for additional mounting equipment or calibration notes for information on calibration. Contact us for detailed selection assistance, or for unique requirements not shown.

For additional high temperature sensors please see the high temperature accelerometer page.

 
Model
-10% -5% +5% +10%
356A05 20k 0.25 1 1.2 6k 10k 0.04 35k -65 to +325 0.8  
356A05/NC 20k 0.25 1 1.2 6k 10k 0.04 35k -65 to +325 0.8  
350B50** 10k 0.5 1.5 3 10k 20k 0.03 25k -65 to +250 8
350B50/NC** 10k 0.5 1.5 3 10k 20k 0.03 25k -65 to +250 8
350A43*** 10k 0.5 - 0.4 10k - 0.04 50k 0 to +150 62.5  
350A43/NC*** 10k 0.5 - 0.4 10k - 0.04 50k 0 to +150 62.5  
356B20 5k 1 - 2 10k* - 0.03 7k -65 to +250 4
356B20/NC 5k 1 - 2 10k* - 0.03 7k -65 to +250 4
356A01 1k 5 - 2 8k* - 0.003 10k -65 to +250 1  
356A01/NC 1k 5 - 2 8k* - 0.003 10k -65 to +250 1  
HT356B01 1k 5 - 2 8k* - 0.003 10k -65 to +365 1  
HT356B01/NC 1k 5 - 2 8k* - 0.003 10k -65 to +365 1  
354C02 500 10 0.3 0.5 2k 4k 0.0005 5k -65 to +250 15.5  
356A03 500 10 - 2 8k* - 0.003 5k -65 to +250 1  
356A03/NC 500 10 - 2 8k* - 0.003 5k -65 to +250 1  
356B21 500 10 - 2 10k* - 0.004 10k -65 to +250 4
356B21/NC 500 10 - 2 10k* - 0.004 10k -65 to +250 4
HT356B21 500 10 - 2 10k* - 0.004 10k -65 to +325 4
HT356B21/NC 500 10 - 2 10k* - 0.004 10k -65 to +325 4
HT356A33 500 10 - 2 10k* - 0.004 10k -65 to +325 5.3
J356A43 500 10 0.4 0.7 7k 10k 0.0008 5k -65 to +250 4.2  
356A63 500 10 - 2 4k - 0.008 10k -65 to +250 5.3
356A02 500 10 0.5 1 5k 6k 0.0005 7k -65 to +250 10.5
TLD356A02 500 10 0.5 1 5k 6k 0.0005 7k -65 to +250 10.5
HT356A02 500 10 0.5 1 5k 6k 0.0008 7k -65 to +325 10.5
HTTLD356A02 500 10 0.5 1 5k 6k 0.0008 7k -65 to +325 10.5
356A32 50 100 0.7 1 4k 5k 0.0003 5k -65 to +250 5.4
356A32/NC 50 100 0.7 1 4k 5k 0.0003 5k -65 to +250 5.4
TLD356A32 50 100 0.7 1 4k 5k 0.0003 5k -65 to +250 6.4  
TLD356A32/NC 50 100 0.7 1 4k 5k 0.0003 5k -65 to +250 6.4  
356A45 50 100 0.4 0.7 7k 10k 0.0005 5k -65 to +185 4.2  
TLD356A14 50 100 0.3 0.5 5k 6k 0.0001 7k -65 to +176 10.5
356A15 50 100 1.4 2 5k 6.5k 0.0002 7k -65 to +250 10.5
TLD356A15 50 100 1.4 2 5k 6.5k 0.0002 7k -65 to +250 10.5
TLD356A16 50 100 0.3 0.5 5k* 6k 0.0001 7k -65 to +250 7.4
356B41 10 100 - 0.5 1k - 0.0002 2k +14 to +122 272  
356B41/NC 10 100 - 0.5 1k - 0.0002 2k +14 to +122 272  
TLD356B18 5 1000 0.3 0.5 3k 5k 0.00005 5k -20 to +170 25
TLD356M98 5 1000 0.3 0.5 3k 5k 0.00005 5k -20 to +170 39

*Frequency ranges vary across axes, see full specifications below for all frequency ranges
**Frequency ranges specified at ±1 and ±3 dB for 350B50 sensor

***Frequency range specified at ±1 dB for 350A43 sensor. See below for full specifications.

Miniature Accelerometers     Back to Top

Lightweight ceramic shear design, titanium cased hermetically sealed units that minimize effects of mass loading. Some units available with TEDS (Transducer Electronic Data Sheet) and high temperature options.

 

356B20
full specs

  • 0.4" titanium cube triaxial sensor
  • ±5000g range
  • 4 gram mass
  • 5-40 female mounting
  • 8-36 4-pin jack used with 034K series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Note: Base model 356B20 is also available and includes a 10ft breakout cable to BNC, model 034K10. Use model 356B20/NC to omit cabling if not required, or order an appropriate length cable separately.

Similar to: B&K 4520-002, Dytran 3023A9, Endevco 65HT-1, B&K 4520-002

 

356A01
full specs

  • Miniature 1/4" titanium cube triaxial sensor
  • ±1000g range
  • 1 gram mass
  • adhesive mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Note: Base model 356A01 is also available and includes a 5ft breakout cable to BNC, model 034G05. Use model 356A01/NC to omit cabling if not required, or order an appropriate length cable separately.

Similar to: Endevco 35A, Dytran 3133A3

 

356A03
full specs

  • Miniature 1/4" titanium cube triaxial sensor
  • ±500g range
  • 1 gram mass
  • adhesive mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: Dytran 3133A1

 

356A05
full specs

  • Miniature 1/4" titanium cube triaxial sensor
  • ±500g range
  • 1 gram mass
  • adhesive mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

356B21
High temperature version available
full specs

  • 0.4" titanium cube triaxial sensor
  • ±500g range
  • 4 gram mass
  • 5-40 female mounting
  • 8-36 4-pin jack used with 034K cable series
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4520-001, Dytran 3023A1 & 3023A2H, Endevco 65-10 & 65HT-10, Kistler 8766A500B & H8766A500B

 

356A32
TEDS version available (TEDS notes)
full specs

  • 0.45" titanium cube triaxial sensor
  • ±50g range
  • 5.4 gram mass
  • 5-40 female mounting (for non-TEDS version)
  • 8-36 4-pin jack used with 034K cable series
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

356A45
Miniature Triaxial with TEDS (TEDS notes)
full specs

  • 0.4"x0.75"x0.4" titanium triaxial sensor
  • ±50g range
  • 4.2 gram mass
  • adhesive mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

General Purpose Accelerometers     Back to Top

This range of hermetically sealed 10.5 gram titanium triaxial accelerometers is our most popular style, and covers a wide range of uses. Applications vary widely and include general vibration testing, motor and pump monitoring, design studies, and vibration control. Many units are available with optional TEDS (Transducer Electronic Datasheet) built in to simplify test setup with a TEDS capable DAQ system.

 

354C02
High temperature or
TEDS version available (TEDS notes)
full specs

  • 0.815" hex x 0.45" height titanium triaxial sensor
  • ±500g range
  • 15.5 gram mass
  • Thru-hole mounting simplifies axis and connector orientation
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
039A23- Allen wrench, 5/32" hex
081B60 -Insulated cap screw, 10-32 thd x 5/8" long
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

356A02
High temperature, TEDS, or High temperature + TEDS versions available
(TEDS notes)
full specs

  • 0.55"x0.8"x0.55" titanium cube triaxial sensor
  • ±500g range
  • 10.5 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

TLD356A14 (TEDS version)
full specs

  • 0.55"x0.8"x0.55" titanium cube triaxial sensor
  • ±50g range
  • 10.5 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

 

356A15
TEDS version available (TEDS notes)
full specs

  • 0.55"x0.8"x0.55" titanium cube triaxial sensor
  • ±50g range
  • 10.5 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4506 & 4506B, Dytran 3093B1 & 3093B1T

 

TLD356A16 (TEDS version)
full specs

  • 0.55"x0.8"x0.55" anodized aluminum cube triaxial sensor
  • ±50g range
  • 7.4 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4506 & 4506B, Dytran 3093B1 & 3093B1T

 

J356A43 
full specs

  • 0.40"x0.75"x0.40" titanium cube triaxial sensor
  • ±50g range
  • 7.4 gram mass
  • Adhesive mount
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4506 & 4506B, Dytran 3093B1 & 3093B1T

Modal Array Accelerometers     Back to Top

Suited for traditional experimental modal analysis or operational modal analysis, with tight phase specification vital for global parameter estimation. TEDS enabled units help channel bookkeeping when used with compatible systems.

     

Also see the TLD356A14 accelerometer option

 

TLD356B18 (TEDS version)
full specs

  • 0.8"x1.03"x0.8" Aluminum cube triaxial sensor
  • ±5g range
  • 25 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A68 - Adhesive mounting base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: Kistler 8762A5

 

TLD356M98 (TEDS version)
full specs

  • 0.8"x1.03"x0.8" titanium cube triaxial sensor
  • ±5g range
  • 39 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A68 - Adhesive mounting base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

High Temperature Accelerometers     Back to Top

Adjusted circuitry allows measurement of these units in temperatures to +325°F (163°C) and are used with traditional ICP power systems. Slight low frequency and broadband resolution specifications may be affected.

 

HT356B01
full specs

  • 0.25"x0.25"x0.25" titanium cube triaxial sensor
  • ±1000g range
  • 1.0 gram mass
  • adhesive mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes: 
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: Endevco 35A, Dytran 3133A3

 

HT356A02
(TEDS notes)
full specs

  • 0.55"x0.8"x0.55" titanium cube triaxial sensor
  • ±500g range
  • 10.5 gram mass
  • 10-32 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A12 - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081B05 - 10-32 to 10-32 mounting stud with shoulder
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

HT356A33
full specs

  • 0.4"x0.77"x0.4" titanium cube triaxial sensor
  • ±500g range
  • 5.3 gram mass
  • 5-40 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

 

 

HT356B21
full specs

  • 0.4" titanium cube triaxial sensor
  • ±500g range
  • 4 gram mass
  • 5-40 female mounting
  • 8-36 4-pin jack used with 034K cable series
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4520-001, Dytran 3023A1 & 3023A2H, Endevco 65-10 & 65HT-10, Kistler 8766A500B & H8766A500B

Filtered Accelerometer     Back to Top

Features built in internal low pass filter for resonance suppression, commonly used in vehicle test cells and environmental chambers.

 

356A63
full specs

  • 0.4"x0.77"x0.4" titanium cube triaxial sensor
  • ±500g range
  • 5.3 gram mass
  • 5-40 female mounting
  • 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable

Rental Includes:
080A - Adhesive mounting base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish
081A90 - 5-40 to 10-32 adaptor stud
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration from 10 Hz to upper 5% point (TMS: MCS-A001T or PCB: ACS-1T). See notes on calibration for additional information

Similar to: B&K 4524B-001, Dytran 3263A1, Endevco 66A11, Kistler 8763B500B

Shock Accelerometers      Back to Top  

Series 350 ICP® mechanically isolated, electrically filtered pyroshock accelerometers are designed to withstand and measure extreme high-level, short-duration transient accelerations. These units are ideal for measuring harsh pyroshock events such as found in metal-to-metal tests, impacts and armor testing, explosive studies, pile driver monitoring, and simulated pyroshock events. High-g shock calibration is included with rental of 350 Series units.

 

350B50
full specs

  • 0.32"x0.72"x0.72" titanium triaxial sensor
  • ±10000g range
  • 8 gram mass
  • Through hole mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
080A197 - Through hole mounting adaptor
081A112 - 6-32 thread x 1/2" long insulated cap screw
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration for high G shock using Hopkinson bar (PCB: ACS-14T) and frequency response fotm 100 Hz to ±1 dB point (PCB: ACS-22T). See notes on calibration for additional information

 

350A43
full specs

  • 1.02"x1.02"x1.02" titanium triaxial sensor
  • ±10000g range
  • 62.5 gram mass
  • Through hole mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes:
100-8994-40​ - Coupling grease
100-8360-70 - STD mounting screw (1/4-28 x 1.5" long) (qty 2)
Calibration - NIST traceable and ISO 17025/A2LA accredited calibration for high G shock using Hopkinson bar (PCB: ACS-14T) and frequency response fotm 100 Hz to ±1 dB point (PCB: ACS-22T). See notes on calibration for additional information

Seat Pad Accelerometer     Back to Top

Used in whole body vibration and vehicle operation tests.

 

356B41
full specs

  • 7.87" diameter, 0.472" thickness
  • ±10g range
  • 272 gram mass
  • contact mounting
  • 5-ft integral cable terminating in 1/4-28 4-pin jack used with 010G, 034G, or 078G series cable
  • /NC (No Cable) option available-use your own or choose custom length and configuration here.

Rental Includes: 
Calibraton - NIST traceable and ISO 17025/A2LA accredited calibration from at least 5 Hz to 100 Hz (TMS: 5 Hz to 1000 Hz, MCS-A001 or PCB: 0.5 Hz to 100 Hz, ACS-17).

Note: Used in whole body vibration and vehicle operation tests; meets ISO 10326-1 standard.

Similar to: B&K 4515B, Dytran 5313A

Notes on Calibration     Back to Top

Calibration data is provided electronically (on CD or USB memory stick) or as printed copies, depending on quantity rented and end-user preference.

The Modal Shop has internal calibration intervals set for most test products at 1 year. ANSI/ISO/IEC 17025:2000 makes clear that it is the responsibility of the end-user organization (in this case, the renter) to determine the appropriate calibration interval under the requirements of its own quality system. Per this, calibration certificates of rented equipment have "calibrated on" dates, but blank "calibration due" dates. Rentals ship with a customer specific expected return date in mind - if equipment is expected out for 5 months, the last calibration date will be within the past 7 months. Calibration to additional standards (e.g. Z540 or specific FAA requirements) are possible, but there may be an additional charge.

The Modal Shop's Scope of Accreditation can be found here. An example of a calibrations certificate can be found here. Please contact us with questions or if a different calibration will be needed for your rental sensors.

Notes on TEDS (Transducer Electronic Data Sheet)     Back to Top

The TEDS option is available on several rental transducers. TEDS stands for Transducer Electronic Data Sheet and provides memory within a sensor with manufacturer name, sensor type, model number, serial number and calibration data. It is an approved IEEE standard (1451.4), and many data acquisition manufacturers include the ability to read TEDS sensors. Not sure if your DAQ has TEDS capability? No problem; TEDS sensors can be used alongside non-TEDS sensors with no issues; the TEDS memory is bypassed. Want more information? See our TEDS FAQ.